How to Clean a Breville Espresso Machine – Unique Methods

How to Clean a Breville espresso machine is important to ward off a negative impact on the flavor of the coffee you prepare.

When too much of the coffee grounds start to build up in the interiors of the coffee machine, the flavor of the espresso and cappuccino changes.

Breville espresso machine

The remainders of coffee grounds cause the drinks to taste sourer and stronger than before. However, we can avoid this by thoroughly cleaning the espresso maker once a month.
Experts recommend giving it a quick but complete clean once it ceases operations. The following methods show how to clean the espresso machine.

How to Clean a Breville Espresso Machine | Traditional Method

Remove the filter and empty grounds.

No grounds should be left inside the filter of the espresso machine. Also, empty the grounds from the filter holder if there are remainders.

Use a nylon scrub in case of having difficulties cleaning the filter.

Next, brew some water for minutes.

Put back the filter holder to the Breville espresso and to get rid of more possible coffee grounds, brew plan water into a cup for up 15 seconds, and then dispose of it.

After trying out the machine a little it with brewed water, proceed to clean the forth enhancer.

Pull the froth enhancer off the steam wand whenever you’re done operating the machine. This component must be rinsed under warm water always.

Subsequently, turn on the selector that is on front of the coffee maker to the steam position to blow some milk out of the wand. Do this for 3 seconds.

To proceed with the steam wand clean-up, it is necessary to turn the selector control to stand by and switch off the machine.

Clean the steam wand with the pin placed on the end of the cleaning tool, but if the rod is extremely dirty, twist off the opening in the centre of the cleaning tool and soak it in hot water, so it is easier to remove clogs there may be.

To clean the drip tray, remove it and empty it from the bottom of the machine. Use dish soap or liquid to wash all of the parts that make up this piece.

Next, rinse them for some minutes and set them back to the Breville machine again.

Now, use a damp cloth to wipe down the outside of the machine.


This is the type of household appliance that we should clean regularly. This is how you can keep the Breville machine deeply clean in case you don’t have enough time to clean it daily.

Monthly Deep Cleaning

Step 1: Descale Breville Machine

If you haven’t cleaned the machine for 20 days or more, it probably needs decalcifying.

At first, you need to set the espresso maker to the Stand-By mode and then unplug it. Fill the water tank to the middle with water and vinegar to decalcify it.

If you have hard water, use 1 part of each to get rid of any mineral inside the machine. To catch the water and vinegar mixture, preferably put a large container right onto the drip pan.

Step 2: Brewing the Vinegar Solution

Next, brew the water and vinegar solution in the espresso machine; pay attention to the orange temperature light when it indicates you that the water has reached the right temperature for brewing.

Run some of this water right down the brewing head into the large container. Don’t forget to turn on the selector before doing this.

Step 3: Steam the Vinegar Solution

This step consists of making the vinegar mixture out of the steam wand. To do this, but the steam wand over the container and set it to the Steam mode, and the water-vinegar solution will run through it.

Step 4: Rinsing the Breville

To fill the water tank, use slightly cold water and rinse the machine. Repeat this procedure three times.

There are other methods to descale a Breville espresso machine. Read on.

Above all, you need to know how scaled the machine is.

One product that is widely commercialized is the Drinking Water Test Kit. This product aims to identify the minerals and how much of them have accumulated in the machine.

If the minerals are high, then it’s time to descale it.

Using Citric Acid

The citric acid is a commercial product that is quite good for cleaning this type of machines. It has properties that decalcify the inside and outside of the machine.

As with products, read the instructions included with this product. This is one of the barista’s favorite methods for cleaning espresso grinder and machines.

Citric Acid

Citric acid naturally gets from citric fruits, but it is also sold in the form of dry powdered “sour salt” in markets and stores.

This product has a resemblance to table salt.

While it is used in culinary applications, many utilize it for decalcifying their Breville machines. The best way to clean Breville equipment is with pure acid.

Cleaning an espresso machine with citric acid is very simple and not so risky. Use two tablespoons of this product and one quart of water.

Aside from being easy to use, it can be found at a reasonable price.

After cleaning the equipment with citric acid, make sure you wash the interiors pretty well. The citric acid can create a buildup of ‘salt’ with time.

Cleaning with baking soda

Baking soda is excellent for Breville machines that have many removable parts. It also performs well when cleaning external factors.

Nevertheless, it could not work out for descaling because it’s not acidic, and it is hard to dissolve in water like fluids like powders that acidic.

Just use 30% of baking soda and 70% of the water in a recipient and rub the outside of your machine with the mixture using a damp cloth.

Unlike other methods, this one doesn’t leave a foul smell on the equipment. Different smells could be tough to remove, making the brewer stink.

Make use of bicarbonate of soda along with other agents to clean the Breville espresso machine. It is not expensive and very easy to find anywhere you go.

Leave a Comment